© Copyright 2014 Amano McGann, Inc. OPUS7000_Installation_10032014 8
OPUS-7000 Installation Manual
1.3 Inspecting the Equipment
A
fter the OPUS-7000 Paystation has been received, confirm all parts are
included. The Paystation is shipped mounted on a pallet surrounded by a
wooden frame. A plastic mounting template is included. Any optional accessories
are packaged separately.
N
ote: Notify Amano McGann if any items are missing. Check the
shipping cartons for damage. If anything is damaged, notify the
transportation company and file a claim. The transportation company
is responsible for the shipment after the device leaves the factory.
T
he box of accessories contains the following items:
V
ault box
(2) Eye Bolts
(10) Function Cards (2 Sets)
Refilling Card
Adjustment Card
Operator Card
Management Card
Subtotal Card
Set of keys for the coin box
(4) ‘66’ keys
(4) ‘68’ keys
Receipt Paper
1.4 Preparing the Site
P
rior to the installation of the Paystation, please make initial preparations at the
installation site. The customer is responsible for providing electrical service to the
Paystation. The electrical service must meet national, state, local, and Amano
McGann’s operating specifications. The customer is responsible for making any
changes necessary to supply a constant, noise free power line to the OPUS-
7000.
N
ote: It is recommended the OPUS-7000 be protected to prevent the
introduction of standing and/or blowing moisture, dust, sand, or other
contaminants into the unit.
T
he OPUS-7000 meets ADA specifications (Americans with Disabilities Act).
Refer to the Architectural Map section for a typical site configuration.
To Next Page
Loading...
