Amazon AMALOG+ - Note on Calibration Test

Use
AMALOG BAH0017.1 11.08
33
7.1.3 Note on calibration test
The AMALOG can support you with the calibration test. Turn the
crank until the acoustic signal is sounded. Counting the number of
crank turns is no longer necessary if you calibrate to 1/40 ha after en-
tering the following settings:
1. Press and hold
key.
2. Press
key.
3. Release both keys and start with the crank turns for the calibra-
tion test to 1/40 ha.
→ As soon as you have calibrated to 1/40 ha, the signal tone will
sound.