Faults
AMALOG BAH0017.1 11.08
37
9 Faults
9.1 Tramline fault message
The occurrence of a tramline fault activates
• the display (Fig. 36)
• an acoustic signal.
Fig. 36
9.2 Fault message with rotary cultivator operation (optional)
Alarm message in event of PTO shaft standstill
The emits an alarm as soon as
the overload clutch of the rotary cultivator PTO
shaft is activated.
When the PTO shaft is at standstill
• the display (Fig. 37) appears
• an acoustic signal is emitted.
Fig. 37