General safety instructions
GH HH Super SMARTCUT BAF0009.3 05.17
WARNING
Risk of being crushed, cut, caught, drawn in or struck if support-
ing parts break.
It is forbidden to:
• Drill holes in the frame or on the chassis.
• Increasing the size of existing holes on the frame or the chassis.
• Welding support parts.
2.10.1 Spare and wear parts and aids
Immediately replace any machine parts which are not in a perfect
state.
Use only genuine AMAZONE spare and wear parts or the parts
cleared by AMAZONE so that the operating permit retains its validity
in accordance with national and international regulations. If you use
wear and spare parts from third parties, there is no guarantee that
they have been designed and manufactured in such a way as to meet
the requirements placed on them.
AMAZONE accepts no liability for damage arising from the use of
unapproved spare parts, wear parts or auxiliary materials.
2.11 Cleaning and disposal
Handle and dispose of any materials used carefully, in particular:
• When carrying out work on lubrication systems and equipment
and
• When cleaning using solvents.
2.12 User workstation
The machine may be operated by only one person sitting in the driv-
er's seat of the tractor.
To Next Page
Loading...
Need help?
General
