Super SMARTCUT BAF0009.3 05.17
9.3 Extended periods of downtime
If the machine is not to be used for a long period of time, it is recom-
mended that, before storing, the machine is cleaned
a suitable preservative. Before recommissioning, an authorised gar-
age should check that the overload clutch between the angular gear-
box and the belt drive is operating correctly.
9.4 Tyre pressure
Front guide wheels: 2 bar
When removing or fitting tyres, the tyres must always be fully
deflated (a split tyre wall can fly apart with explosive force during
removal).
To Next Page
Loading...
