Attaching and removing the machine at the tractor's rear three-
point linkage
GH HH Super SMARTCUT BAF0009.3 05.17
5.1 PTO shaft
Only use the PTO shaft specified by the manufacturer:
• Walterscheid W 2300 with or without freewheel for tractors with
max. 40 HP output
• Walterscheid W 2400 with or without freewheel for tractors with
outputs higher than 40 HP
If you have a tractor without a double clutch for the universal
joint shaft drive, you must necessarily use a freewheel PTO
shaft.
Otherwise, the tractor will remain in motion due to the flywheel
mass of the rotor, even if the clutch pedal has been depressed.
To Next Page
Loading...
Need help?
General
