General safety instructions
Super SMARTCUT BAF0009.3 05.17
2.16.3 Electrical system
• When working on the electrical system, always disconnect the
battery (negative terminal).
• Only use the prescribed fuses. If fuses are used with too high a
rating, the electrical system will be destroyed – danger of fire.
• Ensure that the battery is connected correctly -
positive terminal and then connect the negative terminal. When
disconnecting the battery, disconnect the negative terminal first,
followed by the positive terminal.
• Always place the appropriate cover over the positive battery termi-
nal. Contact with earth may cause an explosion
• Risk of explosion. Avoid sparking and naked flames in the area
of the battery.
To Next Page
Loading...
