Amazone Grasshopper SmartCut User Manual

Adjusting the cutting height
50
GH HH Super SMARTCUT BAF0009.3 05.17
7.1 Front roller (option)
A front roller is available as a special accessory for scarifying on une-
ven terrain. It is fitted into the holders of the front guide wheels (fig.
7.1-1).
To adjust the height of the machine it must be raised and the lynch
pin and bolt on both sides removed. The roller is then located in the
desired position and the bolt secured with the lynch pin.
(fig. 7.1-2).

Amazone Grasshopper SmartCut Specifications

General

Brand	Amazone
Model	Grasshopper SmartCut
Category	Farm Equipment
Language	English