GH HH Super SMARTCUT BAF0009.3 05.17
9 Maintenance are care
The Groundkeeper was designed to be largely maintenance free.
However, the following points must be observed.
9.1 Oil level in the angular gearbox
The angular gearbox on the machine does not require lubrication
servicing. However, the oil level must be checked at least once a
year. The inspection screw on the side of the gearbox must be
opened (fig. 9.1) in order to check whether the oil level reaches up to
the lower edge of the bore hole. The gearbox must be filled with SAE
90 transmission oil (capacity 0.45 l), if required.
To Next Page
Loading...
