Super SMARTCUT BAF0009.3 05.17
GH 2100
• Narrow scarifying, blade spacing 17 mm
Scarifying blades must be attached to all clip bolts on the rotor.
This type of scarifying is relatively aggressive and is suitable for
restorative work on heavily thatched turf (moss) in the spring.
CAUTION
1. It must be ensured that the rotor is equipped with one of the
above blade arrangements. If cutting tools are missing or
have been incorrectly fitted, an imbalance is created which,
over time, will lead to the whole machine being damaged.
2. Only one type of scarifying blade may be used! Risk of imbal-
ance.
3. If a high proportion of soil content is produced from scarify-
ing, only fill the hopper to approximately half way as other-
wise there is a risk that the tractor and machine frame will be
overloaded when driving with a full hopper.
4. By the same token, the tractor must also be driven carefully
across uneven terrain when the hopper is full and the ma-
chine is raised as otherwise the frame may be damaged due
to overloading.
5. When the container is full the machine must always be low-
ered slowly. There is a risk of damaging the machine if the
rear cage roller strikes stones or fixed edges.
To Next Page
Loading...
Need help?
General
