Figure 4
All of the
LCD
segments will
light
up
for
a few
seconds
to
verify all segments
are operating properly.
3.
Replace the battery door
, and fold out the desk stand and place the
console in the upright position.
The
console will instantly display time,
indoor
temperature and
humidity as
designated
by the
icon. The
remote temperature
and
humidity will update
on the display within a few minutes on the appropriate channel.
While in the search mode, the remote search icon will be constantly displayed.
If you have more than once remote sensor (up to eight remotes are supported),
the display will automatically toggle between sensors until all sensors have
reported in.
Do not
touch any
buttons until the remote
sensor
has
reported
in, or the
radio
search icon
is no
longer
on,
otherwise
the remote
sensor search mode
will
be terminated.
When
the
remote
sensor
temperature
and
humidity has
been
received, the
console will automatically
switch to
the normal
mode,
and all
further settings can be performed.
If
the
remote does
not
update, please
reference
the
troubleshooting guide
in
Section 8 .
Version 1.0 ©Copyright 2013, Ambient LLC. All Rights Reserved. Page 5
To Next Page
Loading...
Need help?
General
