To enter the set mode, press and hold the SET key for 3 seconds
1. 12 hr/24 hr time format. Press the [+] key to switch between 12 and
24 hour format. Press the SET key to advance to the next setting.
2. Hour. Press the [+] or [-] key to increase or decrease the hour. Press
the SET key to advance to the next setting.
3. Minute. Press the [+] or [-] key to increase or decrease the minute.
Press the SET key to advance to the next setting.
4. Month-Day/Day-Month format. Press the [+] key to switch between
mm-dd and dd-mm date format. Press the SET key to advance to the
next setting.
5. Month. Press the [+] or [-] key to increase or decrease the month.
Press the SET key to advance to the next setting.
6. Day. Press the [+] or [-] key to increase or decrease the day. Press
the SET key to advance to the next setting.
7. Year. Press the [+] or [-] key to increase or decrease the year. Press
the SET key to advance to the next setting.
8. Alarm Hour. Press the [+] or [-] key to increase or decrease the alarm
hour. Press the SET key to advance to the next setting.
9. Alarm Minute. Press the [+] or [-] key to increase or decrease the
alarm minute. Press the SET key to advance to the next setting.
10. Temperature Units of Measure. Press the [+] key to switch between
°F and °C units of measure. Press the SET key to advance to the
next setting.
11. Max/Min Clearing. The Max/Min can be programmed to clear daily
(at midnight) or manually. Press the [+] key to switch between
“Clears Daily” and Clears Manually. Press the SET key to exit setting.
5.2 Day Month/Year/Alarm Display
Press the SET key (do not hold) to toggle between the Day/Month, Year and
Alarm Time.
5.3 Time Alarm
To turn on and off the Time Alarm, press the CLEAR/- button and the
alarm icon will appear when set, and disappear when disabled.
5.4 Reset Max/Min
To reset the Max/Min values, press and hold the CLEAR/- button for 3 seconds.
Version 1.0 ©Copyright 2013, Ambient LLC. All Rights Reserved. Page 8
To Next Page
Loading...
Need help?
General
