65
4
SSH CLI
Ambit EMTA can be configured via SSH (no Telnet). A SSH client utility
is needed for connecting to SSH server embedded in EMTA. Through SSH,
EMTA’s configurations like cable modem settings, battery settings, etc all
can be changed. The SSH server can only be accessed from CM’s IP
address. It cannot be accessed by MTA and local IP address. SSH is only
allowed to login by “admin”, “user” account is not allowed. The login
password changed every day, so a POTD utility is needed to general correct
password. Regarding the usage guideline of POTD, please refer to chapter
3.15.
To Next Page
Loading...
