Ambit U10C034 - Battery

U10C034 Telephony Version v1.4 June 2008
66
4.1 Battery
Battery relative information can be showed and settings can be changed. It has the following
commands.
set
Set the timer to disable Ethernet or USB interface when loosing A/C.
show
Show all battery relative settings.
4.2 CM
Provides the commands to show Cable Modem relative information and control downstream
channel, upstream channel, log display ON or off and firewall.
gotoDownstream
Changes to specific downstream channel.
gotoUpstream
Changes to specific upstream channel
log
Enable or disable message logging.
ping
Pings to the specific IP address from CM IP stack.
set
Enable or disable CM mini firewall.
show
Show various information including:
ARP table
BPI status
CM certificates
DOCSIS classifiers
CM config file name and contents
CPE info/table
Downstream status and signal quality
DSx message history
CM event log