U10C034 MSO User’s Manual v1.4 June 2008
vii
About This Document
This document describes standards compliance, telephony features, and data
features of U10C034 Telephony firmware, and how to manage it via
MIBs/VSIFs/Telent-CLI.
Some features described in this document may not be fully tested and supported
in your specific firmware release version. Where possible, features supported only
by specific versions are indicated in this document. See the Release Notes/Letter
of Operational Considerations accompanying your firmware for further details.
AUDIENCE
If you are evaluating U10C034 Telephony products for use in your VoIP network,
you should read this entire manual.
This manual assumes that you have a basic understanding of DOCSIS and
PacketCable standards, and a working knowledge of cable data and telephony
networks.
ABOUT THE U10C034 TELEPHONY FIRMWARE
U10C034 Telephony firmware provides operating, maintenance and trou-
bleshooting functions for the following AMBIT eMTA:
• U10C034 Telephony Modem
To Next Page
Loading...
