Ambu aView 2 Advance Reference Manual

4.2.2. Date and Time
In Date & Time under the Setup menu the local date and time, where the displaying unit is used, can be selected.
• Press the Settings
tab in the tool bar on the right
• Press Setup and press Date & Time
3
• Open the Time zone
4
drop-down menu and select time zone from the list. The time zone setting is used to correct
daylight savings automatically. It is important to choose the correct time zone so that correct daylight savings can be
updated automatically
• Use the Set time
5
wheel to set the current time
• Select the current date in the Date
6
calendar
The settings are activated as soon as they are chosen.
3
4
5
6
4.2.3. Network setup
In Network Setup under the Setup menu you can setup connection to Wi-Fi and local area network (LAN).
NOTE: Always use a secure network when handling images and patient data. See technical details about the
configuration of the LAN in Appendix 3.
LAN
Setup LAN (Ethernet):
• Connect one end of a LAN cable to the
ethernet connection port on the back of
the displaying unit.
• Ensure that the other end of the LAN
cable is connected to a router or LAN
wall connector.
13
EN

Ambu aView 2 Advance Specifications

General

Brand	Ambu
Model	aView 2 Advance
Category	Monitor
Language	English