Amcrest AMDV4M4 User Manual

114
There are 5 different settings areas that can be reset to default settings: Camera settings, Event settings, Network
settings, System settings, and Storage settings. All of these settings can be reset by the use of the All checkbox.
The following settings are also reset with a factory reset:
• System Menu Color
• Language
• Time Display Mode
• Video Format
• IP Address
• User Accounts
To confirm settings, click the OK button near the bottom right hand corner. To cancel any modifications, click the
Cancel button near the bottom right hand corner. To apply the settings, click the Apply button near the bottom
right hand corner.
4.10.5.15 Update
This screen is used to update the DVR's firmware to the latest version. To conduct a system update, it is required to
put an update file onto a USB storage device and plug it into the DVR. Ensure the update file is named update.bin.
Below is a screenshot of the Update screen:

Amcrest AMDV4M4 Specifications

General

Brand	Amcrest
Model	AMDV4M4
Category	DVR
Language	English