Amcrest AMDV4M4 User Manual

125
5.3.4 Alarm Interface
This is the interface for the DVR's Alarm management menu. There are 4 main sections. See the table below for
more information:
Number
Section
Parameter
Function
1
Alarm
Type
Video loss
The system triggers the alarm when video loss occurs.
Motion detection
The system triggers the alarm when motion detection
occurs.
Tampering
The system triggers the alarm when camera is maliciously
masked.
Disk full
The system triggers the alarm when the disk is full.
Disk error
The system triggers the alarm when a disk error occurs.
External alarm
An alarm input device triggers the alarm.
2
Operation
Prompt
The system automatically pops up an alarm icon on the
Alarm button in the main interface when there is an
alarm.
3
Alarm
Sound
Play alarm sound
The system sends out an alarm sound when an alarm
occurs. A custom sound can be used.
Sound path
Here you can specify the alarm sound file.
4
Alarm
Indicator
All
All triggered alarms are displayed here.
5.4 Web Access Settings Menu
The web access settings menu has slight differences with the DVR's menu. In this section, the web access settings
menu will be explained in depth just like the DVR settings menu had been explained in the sections above. For
more information about the DVR's Settings Menu, see section 4.10.

Amcrest AMDV4M4 Specifications

General

Brand	Amcrest
Model	AMDV4M4
Category	DVR
Language	English