39
Click the button and the system goes to the search interface. Please refer to section 4.8.1 for more detailed
information.
4.5.6 Alarm Status
Click the button and the system goes to the alarm status interface. It is used to view device status and channel
status. Please refer to chapter 4.10.3 for more information.
4.5.7 USB Manager
Click the button and the system goes to the USB Manager interface. It is used to view USB information, backup,
and update. Please refer to chapter 4.8.2 for more information.
4.5.8 HDD Manager
Click the button and the system goes to the HDD manager interface. It is used to view and manage HDD
information. Please refer to chapter 4.10.5.2 for more information.
4.5.9 Network
Click the button and the system goes to the network interface. It is used to set the network IP address, default
gateway and etc. Please refer to chapter 4.10.2 for more information.
4.5.10 PTZ
Click the button and the system goes to the PTZ control interface. Please refer to chapter 4.4.2 for more
information.
4.5.11 Tour
Click the button to enable tour. The icon becomes and you can see the tour is in process.
4.5.12 Channel Info
Click the button and the system goes to the channel information interface. It is used to view information about
the corresponding channel. See the image below to view the Channel Information screen:
To Next Page
Loading...
Need help?
General
