To Next Page

To Previous Page

• Write-Community: This field allows the user to specify which user community has write access.

• Trap Address: This field allows the user to enter the IP address of the PC running the MIB software.

• Trap Port: This field allows the user to enter the port number of the PC running MIB software.

To revert to default settings, click the Default button near the bottom left hand corner. To confirm settings, click

the Save button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the

bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand corner.

4.10.2.11 Multicast

Multicast is a feature that enables the DVR to broadcast it’s live view to multiple computers on the same network.

Below is a screenshot of the multicast screen:

Below is an explanation of the fields in the Multicast settings screen:

• Enable: This checkbox allows the user to enable the Multicast feature for the DVR.

• IP Address: This field allows the user to enter the multicast IP address.

• Port: This field allows the user to enter the port number for the multicast IP address.

For more information on how to configure multicast, see the information below.

Multicast IP Address Range (IPV4): 224.0.0.0 through 239.255.255.255

Amcrest AMDV4M4 User Manual

Questions and Answers: