AMD 880G User Manual

28
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Power Management Setup
Power Management Feature
Help Item
Suspend mode Auto
Repost Video on S3 Resume No
Power management/APM Enabled
Suspend Time Out Disabled
Power Button Mode On/Off
Video Power Down Mode Suspend
Hard Disk Power Down Mode Suspend
Hard Disk Time Out (Minute) Disabled
Power On by PCI Card Disabled
Wake-up by PCIE Disabled
RTC Resume Disabled
Options
Disabled
Standby
Suspend
↑↓ : Move Enter: Select +/-
/
: Value F10: Save ESC: Exit F1: General Help
F5: Discard Charges F6: Standard Defaults F7: Optimized Defaults
Suspend Mode
Use this item to select the ACPI state used for system suspend. The optional settings
are: S1(POS) ; S3(STR); Auto.
Repost Video on S3 Resume
Use this item to determine whether to invoke VGA BIOS post on S3/STR resume. The
optional settings are: No; Yes.
Power Management/APM
Use this item to enable or disable SMI based power management and APM support.
The optional settings are: Disabled; Enabled.
Suspend Time Out
If it is set Enabled and no activity during this time period, the BIOS will place the
system into suspend low power state. The optional settings are: Enable; 1~64
minutes.
Power Button Mode
Select Power button functionality. The optional settings are: On/Off; Suspend.
Video Power Down Mode
The optional settings are: Disabled; Standby and Suspend.
Hard Disk Time Out
Use this item to select hard disk time out. The optional settings are: Disabled;
1~15(Minutes).
PowerOn by PCI Card/Wake-up by PCIE/ RCT Resume.
Use these items to generate a wake event with PCI PCIE or RTC device.

AMD 880G Specifications

General

Brand	AMD
Model	880G
Category	Motherboard
Language	English