AMD 880G User Manual

32
Choose Enabled means only AMD over drive can adjust voltage. Choose Disabled
means only BIOS can adjust voltage.
CPU Vcore 7-Shift
Use this item to set CPU voltage by 7 stages.
The optional settings are: Auto; +50Mv~+350mV.
CPU-NB 7-Shift
The optional settings are: 1.50V~1.85V.
NBCore Voltage Select
The optional settings are: 1.10V; 1.15V and 1.20V.
NBPCIE Voltage Select
The optional settings are: 1.10V; 1.15V, 1.20V and 1.25V.
HT Link Speed
The HyperTransport link will run at this speed of it is slower than or equal to the
system clock and the board is capable. The optional settings are: Auto;
200MHz~2.0GHz.
HT Link Width
The optional settings are: Auto; 4Bit; 8Bit and 16Bit.
DRAM Command Rate
The optional settings are: Auto; 1T; 2T.
Memory Clock Mode
The optional settings are: Auto; Limit and Manual.
3-12-1 CPU Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
CPU Configuration
Help Item
CPU Configuration
Module version: 14.14
AGESA Version: 6.1.3.0
Physical Count: 1
Logical Count: 4
AMD Phenom™II X4 945 processor
Revision: C2
Cache L1: 512KB
Cache L2 : 2048KB
Cache L3 : 6MB
Speed : 3000MHz, NB Clk : 200MHz
Able to Change Freq. : Yes
UCode Path level: 0x100086
GART Error Reporting Disabled
Microcode Update Enabled
Secure Virtual Machine Mode Enabled
AMD Cool & Quiet Control Enabled
GPI Function Enabled
C1E Support Disabled
ACPI SRAT Table Enabled
Enable or Disabled the
building of ACPI
SART Table
↑↓ : Move Enter: Select +/-
/
: Value F10: Save ESC: Exit F1: General Help
F5: Discard Charges F6: Standard Defaults F7: Optimized Defaults
GART Error Reporting
This option should remain disabled for the normal operation. The driver developer
may enable it for testing purpose.
Secure Virtual Machine Mode
Enable or disable secure virtual machine mode(SVM).
AMD Cool & Quiet Control

AMD 880G Specifications

General

Brand	AMD
Model	880G
Category	Motherboard
Language	English