4
Making RAID driver diskette before Install Windows OS
Before you install the Windows OS, you will need to make a RAID driver diskette before you start
to install the Operating System.
How to make a RAID driver diskette?
1: Insert the diskette which is being formatted in boot drive on a system which can start OS.
2: After booting OS insert the bundle CD in your CD-ROM
3: Copy all the files from \AMD\RAIDDisk to boot diskette
Once you have the SATA driver diskette ready, you may start to install Windows operating system.
Installation of Windows Operating System
Installation of Windows OS
For installation of Windows OS, please insert Windows OS CD into the CD-ROM drive. Then
remove the boot diskette, and boot the system. At the very beginning, you will see the message at
the bottom of screen, “Press F6 if you need to install a third party SCSI or RAID driver….”
At this moment, please press <F6> key and follow the instructions of Windows XP/2000 for the
proper installation. If you are Windows 7 /Vista OS, please load SATA RAID driver from this
location.