– 14 –
CHECKING FOR OPEN ZONES
Using the ✱ Key
Before arming your system, all protected doors, windows and other protection
zones must be closed or bypassed (see BYPASSING section). Otherwise the keypad
will display a "Not Ready" message. Using the [✱] key will display all zones that
are faulted, making it easier for you to secure any open zones.
To show faulted zones:
N O T RE A D Y - PR ES S
✱
Note: A green READY indicator (if present) on the keypad
T O S H OW FA U L TS will be lit if the system is ready to be armed. If not
lit, the system is not ready.
1. ✱ PRESS THE [✱] KEY
Do not enter security code, but simply press the [✱]
key.
2.
F A U LT 0 5 FR ON T
U PS T A IR S B E D R OO M
SECURE FAULTED ZONES
Typical fault display shows open zones. Secure or
bypass the zones displayed before arming the
system.
3.
* * S Y S T E M R E A D Y* *
SYSTEM CAN BE ARMED
The "Ready" message will be displayed when all pro-
tection zones have been either closed or bypassed.
You may now arm the system as usual.
To Next Page
Loading...
