– 16 –
ARMING PERIMETER ONLY (cont’d)
(With Entry Delay OFF)
Using the 7 Key
INSTANT
Use this key when you are staying home and do not expect anyone to use the
entrance door.
When armed in INSTANT mode, the system will sound an alarm if a protected
door or window is opened, but you may otherwise move freely throughout the
premises. The alarm will also sound immediately if anyone opens the entrance
door. Close all protected perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section). The green READY indicator (if present)
on the keypad should be lit if the system is ready to be armed.
1.
+ 7 ENTER SECURITY CODE THEN PRESS INSTANT
(Security Code) INSTANT
Example: 7 2 9 6 then press the INSTANT key
if using the AM6128 keypad
or for quick arming PRESS THE “C” KEY (ON INSTANT) for 2 seconds if
using the AM6139 keypad.
2.
H OM E
* I N S T A N T *
LISTEN FOR 3 BEEPS
The keypad will beep three times and will display the
armed HOME message. The red ARMED indicator also
lights.
You can restart the exit delay at any time after arming in HOME mode by
pressing the
✴ key. This is useful if you wish to open the entry/exit door to let
someone
in after arming the system and avoids having to disarm the system and
then re-arm it again.