– 17 –
ARMING ALL PROTECTION
(With Entry Delay ON)
Using the 2 Key
AWAY
Use this key when no one will be staying on the premises.
When armed in AWAY mode, the system will sound an alarm if a protected door
or window is opened, or if any movement is detected inside the premises. You may
leave through the entrance door during the exit delay period without causing an
alarm. You may also re-enter through the entrance door, but must disarm the
system within the entry delay period or an alarm will occur.
Close all protected perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section). The green READY indicator (if present)
on the keypad should be lit if the system is ready to be armed.
1.
+ 2 ENTER SECURITY CODE THEN PRESS AWAY
(Security Code) AWAY
Example: 7 2 9 6 then press the AWAY key if using
the AM6128 keypad.
or for quick arming PRESS THE “A” KEY (ON AWAY) for 2 seconds if
using the AM6139 keypad.
2.
A RM ED ** A W AY * *
Y O U M AY EX I T N O W
LISTEN
The keypad will beep twice, or beep continuously if
exit warning has been programmed for your system,
and displays the armed AWAY message. The red
ARMED indicator also lights.
The “You May Exit Now” portion of the message
disappears when the exit delay expires.
To Next Page
Loading...