Specifications
For a complete listing of all analyzer specifications, refer to the analyzer User Manual.
Utility Requirements
All systems are available with choice of nominal AC voltages:
Field Unit:
• 100V ±10%, 50/60 Hz, 175W max.
• 115V ±10%, 50/60 Hz, 175W max.
• 230V ±10%, 50/60 Hz, 175W max.
Controller:
• 95–230V ±10%, 47-63 Hz, 75 W max.
Outputs
• 80-character vacuum fluorescent display
• Two 4 to 20 mA DC analog signals with completely user-defined span; one analog
output is auto-ranging
• RS-485 bidirectional serial port
Alarm Contacts
• System Alarm
• Concentration Alert
• Range or Verification Alert
(Contacts rated 30 VAC / 60 VDC, 50 VA maximum, 1A maximum, resistive)
Allowable Inlet Pressure
207 to 690 kPa gauge (30 to 100 PSIG)
10 | 5000 Moisture Analyzer
To Next Page
Loading...
