Ametek 5000

38 | 5000 Single-Point Moisture Analyzer
Scheduled Maintenance
Weekly
• Operate internal generator to verify calibration.
• Adjust Span, if necessary.
Quarterly
• Perform system inspection and leak check.
• Replace the filter frit.
Yearly
• Replace or refill the dryer molecular sieve.
• Replace or refill the trap’s activated charcoal.
• Replace the super dryer.
• Refill the moisture generator with distilled or deionized water (>12
Mohms resistivity).
• Replace scrubber cartridge ( use only with acid gas option). See Ap-
pendix B.