To Next Page

To Previous Page

Warnings

Review and follow these Warnings to avoid personal injury or environmental contamination.

High voltages are present in the analyzer housing. Always disconnect power and/or external

power sources to the analyzer before opening any covers or doors on the analyzer to check or

perform maintenance on any components within the enclosures.

If it is necessary to open the analyzer’s covers or doors while the circuits are live, first monitor

the area for flammable gases (and proceed only when the area is safe).

When the enclosure is open, take appropriate precautions to avoid electrical shock. Hazardous

voltages are present inside.

All electrical connections, adjustments, or servicing of the analyzer should be performed only

by properly trained and qualified personnel.

All electrical connections, materials, and methods (plus all safety policies and procedures)

must be made in compliance with local wiring regulations and electrical code for the hazardous

area, as specified by the Owner Company, local electrical-inspection authority, and National/

EU regulations.

Follow appropriate regulatory and/or company procedures to lock out the analyzer while work-

ing on the analyzer electronics.

Before working on the analyzer, test the area for flammable gases. If a flammable gas atmo-

sphere is present, do not open any doors without first disconnecting power and/or alternate

power sources to the analyzer.

The field unit may contain flammable or toxic process gas. Remove the field unit dome lid in a

well-ventilated area only after electrical power is removed and the surrounding are is known to

be nonhazardous..

Before working on the sample system, confirm that the system has been purged with Zero fluid

and is isolated (blocked in) from the process.

If the Sample System Enclosure is heated, the components within it will be hot; take precau-

tions to avoid burning yourself.

Verify ground continuity of all equipment before applying power.

WARNING

6 | 5000 Moisture Analyzer

Ametek 5000 User Manual

Other manuals for Ametek 5000