5
A01-00055 Rev N
1.0 INTRODUCTION
Thank you for your purchase of the AMETEK Powervar Security II Series
UPM (hereafter referred to as “UPM”). AMETEK Powervar manufactures
two versions of the UPM – a standard version, and a medical version
listed to UL60601-1 and cUL C22.2 No. 60601.1. In addition, all
models are compatible with International electrical distribution systems.
International versions are UL listed (Medical listed to IEC60601-1 and
EN60601) and carry the CE Mark. We’ve prepared this document to help
familiarize you with the functions and controls of this product. If, after
reviewing this manual, you have any questions at all, please feel free to
contact our technical support team by phone (1-800-369-7179) or email
us at rma.powervar@ametek.com.
AMETEK Powervar is a global provider of power management solutions,
headquartered in Waukegan, Illinois, with international sales and
distribution ofces in Swindon, United Kingdom, Toronto, Canada,
Mexico City, Mexico and Germany. All AMETEK Powervar solutions
incorporate a high energy surge diverter, a noise lter and a low
impedance isolation transformer. Together these components prevent
power disturbances from destroying, degrading or disrupting system
operations.
Registering your AMETEK Powervar Product
Please take a few moments to register your product purchase.
Registration is easy and quick via the product registration page found on
our website at powervar.com.
To Next Page
Loading...
Need help?
General
