Ametek Spectrolab LAS01 - 2 Safety Instructions - Symbols; 2.1 Warning Symbols Explained

Safety
SPECTROLAB
— 23.07.2020 —
11
2 Safety
Every user of the instrument must have read and understood these operating
instructions. This applies in particular to the safety instructions.
2.1 Symbols used
The following symbols are used in these abbreviated operating instructions and/or
on the instrument.
If required, additional important information is available in connection with these
symbols.
General warning sign!
Warning! High voltage!
Warning! Flammable substances!
Warning! Hot surface!
Warning! Toxic substances!
Warning! Optical radiation!
Warning! Risk of hand injury!
Warning! Risk of suffocation!