EasyManuals Logo

Ametek Spectrolab LAS01 User Manual

Ametek Spectrolab LAS01
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Safety
14 SPECTROLAB
23.07.2020
2.3.1 Samples
Only dry metal samples must be measured.
Warning! Risk of injury and health hazard!
Risk of injury and health hazard due to
pressurized or combustible samples.
Pressurized or flammable samples must not be measured.
2.3.2 Preparing the Sample
Warning! Harmful and toxic substances!
During the preparation of samples, e.g. during the grinding process,
toxic vapors
and toxic clouds of dusts may be generated, depending on the sample mater
ial.
When disposing of these dusts, compliance with legal regulations and fire
prevention instructions is mandatory.
The operating company of the spectrometer shall be responsible for
compliance with the limit values of the maximum permissible pollutant
concentrations in the breathing air.
During the preparation, compliance with the safety instructions provided by
the manufacturer of the sample preparation machine is mandatory. Personal
protective equipment must be worn.
When preparing samples that could potentially release toxic substances,
wearing protective goggles and the use of appropriate respiratory protection
equipment is mandatory.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ametek Spectrolab LAS01 and is the answer not in the manual?

Ametek Spectrolab LAS01 Specifications

General IconGeneral
BrandAmetek
ModelSpectrolab LAS01
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals