12 SPECTROLAB —
Notice!
This sign warns of activities or conditions that may adversely affect the function of
the instrument.
Information
Displays information that is important for the correct and safe use of th
e
2.2 User information
Non-compliance with the operating and safety instructions may lead to injuries
and can cause a health hazard.
Carefully read the manual and always comply with the safety instructions.
If the instrument is located on an incline and equipped with castors, it can roll
away during operation. Secure the instrument for operation. This applies also
when the instrument is being transported.
Only service personnel authorized by the manufacturer are permitted to
unpack, install, set up and connect the instrument.
The instrument must only be connected to the mains power supply with a
protective grounding conductor. The instrument may be operated only in a dry
environment (protection class IP 20, DIN 40050).
Disconnect the power plug before opening the instrument. The instrument is
only completely disconnected from power if the power plug is removed.
Never tamper with the safety devices! If it is suspected that a safety device
does not work properly, shut down the instrument immediately. Please
contact your Service Center.
Compliance with the information labels on the instrument is mandatory.
While operating and maintaining the instrument, compliance with all safety
instructions and accident prevention regulations is mandatory.
To Next Page
Loading...
Need help?
General
