www.amico.com 27
Environmental Conditions
RH
20% - 90%
P
700hPa - 1060hPa
-10°C
(14°F)
+50°C
(122°F)
Temperature range
for transport
and storage
Atmospheric
humidity
for transport
and storage
Air pressure
for transport
and storage
Electro-Magnetic Compliance Data for Amico GoLift
Guidance and Manufacturer’s Declaration - Electromagnetic Emissions
The [EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below.
The customer or the user of the [EQUIPMENT or SYSTEM] should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The [EQUIPMENT or SYSTEM] uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The [EQUIPMENT or SYSTEM] is suitable for use in all establishments
other than domestic establishments and those directly connected to
the public low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
REFERENCES ON THE PACKAGE
To Next Page
Loading...
