5 Overview
BNNbOO
ID: 1138310 Issue date January 01, 2010
48
Operation check
7 Control light for hydraulic brake release and supply
pressure
As long as this control lamp is lit, the brake release and supply
pressure of the hydraulic system is not sufficient. Do not start to
drive until this control lamp has gone off.
WARNING!
If the control lamp for the hydraulic brake release/supply pressure
lights up while driving or does not go off after starting the engine,
the machine must not be driven any further.
1. Check whether the seat contact switch is closed.
2. If the seat switch is closed and the control lamp is still lit, call
a specialist to help solve the problem.
To Next Page
Loading...
