6 Operating
BNNbOO
ID: 1138310 Issue date January 01, 2010
54
Roll-over bar (ROPS)
WARNING!
Accident hazard!
The ROPS must be in the up
position during operation.
The ROPS is only folded down for
transport purposes.
Putting up the ROPS
First, remove the split pin (1) and then
the bolt (2).
Place the parts on the rear water tank
or on the seat. They should be easy
to reach when you come to refit them.
Lift the ROPS until it remains upright
alone.
Stand in the driver's position and pull
the ROPS all the way up.
1
2
To Next Page
Loading...
