7 Options
BNNbOO
ID: 1138310 Issue date January 01, 2010
74
Revolving warning light
Position when not in operation
Fold the rollover protection (ROPS)
down for transport or during extended
periods of non-use.
The revolving warning light can be
attached to the holder on the inner
right of the roll-over protection
(ROPS).
Make sure that the fastening screw
(1) is tightened.
Replacing the bulb
Undo the anti-theft screw (1).
The hood can be removed by rotating
it to the right.
Press the two lugs of the bulb holder
together.
1
To Next Page
Loading...
