AmScope SM-4 Series - 2.3 Setting up the Specimen

SM-4 Series Stereo Microscope
AmScope Proprietary Page 12 of 37
2.2.6 Attaching a Ring Light (Optional Accessory)
Ring lights are a recommended
accessory and are purchased
separately.
1. Loosen the screws on the ring light.
The ring light may be black or white
depending on the model.
1. Screw the ring light adapter into the
bottom of the objective lens
housing.
2. Adjust the screws on the ring light.
3. Securely mount the ring light onto
the adapter.
4. Turn it on and adjust the light.
2.3 Setting up the Specimen
Place the specimen on a flat surface beneath the head of the microscope.