SM-4 Series Stereo Microscope
AmScope Proprietary Page 19 of 37
2.7 Maintenance
2.7.1 No Sun/Heat
Do not place the microscope in direct sunlight or in high heat.
Keep the microscope indoors in a dry and clean place with
temperatures between 32°-100° F (0°-40°C), maximum
relative humidity: 85%.
2.7.2 No Dust
Always keep the microscope covered by the dust cover
when not in use. The glass will attract dust, obscuring your
view. Make sure to keep it in a dry and clean place in order
to prevent rust.
2.7.3 Keep Glass Clean
All glass surfaces must always be kept clean.
Oil and dirt from your fingerprints will obstruct your view.
Fine dust on the optical surface should be blown off using a hand
blower or gently wiped off with a soft lens tissue.
2.7.4 Use an optical lens cleaner
Carefully wipe off oil or fingerprints on lens surfaces using a tissue
moistened with a small amount of 3:7 alcohol to ether mixture.
2.7.5 Do not use lens cleaner on the non-glass parts of the microscope.
Do not use the optical lens cleaning solution to wipe the surfaces of the
other components of the microscope.
All other parts, especially those made of plastic, should be cleaned with
a mild detergent.
2.7.6 Do not touch the glass.
Avoid touching the lenses on the objective and the eyepiece.
2.7.7 Do not take apart the microscope.
Do not assemble or disassemble the microscope‟s electrical
components yourself.
To Next Page
Loading...
