AXB-F117 Stealth 1 Camera Controller Table of Contents i
Table of Contents
Introduction ...........................................................................1
Overview 1
Features 1
What’s New 2
Application 3
Servomotor Mode 3
Positional mode 4
Speed mode 4
Motor Mode 4
Pre-Installation Settings.........................................................5
Overview 5
Configuration Settings 5
Setting zoom, focus, and iris jumpers to
servomotor or motor mode 6
Setting zoom, focus, and iris switches to
servomotor or motor mode 7
Setting the RS-232 DIP switch (S1) 7
Setting the AXlink Device DIP switch (S2) 8
Setting Internal Jumpers to AXlink or RS-232
Communication Mode 9
Installation...........................................................................13
Overview 13
Mounting the AXB-F117 13
Wiring the Connectors 17
Preparing captive wires 17
Wiring guidelines 18
Using the AXlink 4-pin connector 18
Using the lens control DB-15 HD (high density)
connector 20
Using the camera control RS-232 DB-9
connector 22
Setting the adjustable pan-limit stops 22
Setting the adjustable tilt-limit stops 24