AMX CTC-1402 User Manual

User Manual - CTC-1402
17
Installation
Warning: Before installation, ensure the device is disconnected from the power source.
Installation:
1. Attach the installation bracket to the enclosure using the screws provided.
The bracket height can be adjusted Up/Down>The bracket can face up or down.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the unit.
4. Attach the brackets to a surface or suitable location with user supplied screws.
5. Repeat steps 1~4 to install the receiver.

AMX CTC-1402 Specifications

General

Brand	AMX
Model	CTC-1402
Category	Control Unit
Language	English