AMX CTC-1402 User Manual

User Manual - CTC-1402
27
2. At the prompt (>), type the Telnet command and press Enter.
If “Launch TELNET Window via User Dened Program” is selected, it may be require to enable Telnet as follows:
1. Go to Start/Control Panel/Programs and Features;
2. On the left, select “Turn Windows features On or O”;
3. Select the check-boxes Telnet Client and Telnet Server, and click “OK”.

AMX CTC-1402 Specifications

General

Brand	AMX
Model	CTC-1402
Category	Control Unit
Language	English