AMX CTC-1402 - Page 48

User Manual - CTC-1402
48
No. Function Description Syntax Example
27 AUDOUT_MUTE
Sets the audio mute
mode for the audio
output port
Command:
SEND_COMMAND <DEV>,”’AUDOUT_MUTE-
<ENABLE|DISABLE>’”
Return:
AUDOUT_MUTE-<ENABLE|DISABLE>
Command:
SEND_COMMAND dxDev, “’?AUDOUT_MUTE’”
Return:
AUDOUT_MUTE-disable
Description:
Audio mute mode is disable
28 ?AUDOUT_MUTE
Gets the audio mute
mode for the audio
output port
Command:
SEND_COMMAND <DEV>, “’?AUDOUT_
MUTE’”
Return:
AUDOUT_MUTE-<ENABLE|DISABLE>
Command:
SEND_COMMAND dxDev, “’?AUDOUT_MUTE’”
Return:
AUDOUT_MUTE-disable
Description:
Audio mute mode is disable
29 AUDOUT_MAXVOL
Sets the audio max vol
for the audio output port
Command:
SEND_COMMAND <DEV>, “’AUDOUT_
MAXVOL-<value>’”
Return:
AUDOUT_MAXVOL-<value>
Description:
Variable:
<value> = {0~100}
Command:
SEND_COMMAND AUDIO_OUTPUT_1,
“’AUDOUT_MAXVOL-75’”
Return:
AUDOUT_MAXVOL-75
Description:
Set Audio max is 75
30 ?AUDOUT_MAXVOL
Gets the audio max vol
for the audio output port
Command:
SEND_COMMAND <DEV>, “’?AUDOUT_
MAXVOL’”
Return:
AUDOUT_MAXVOL-<value>
Description:
<value> = {0~100}
Command:
SEND_COMMAND AUDIO_OUTPUT_1,
“’?AUDOUT_MAXVOL’”
Return:
AUDOUT_MAXVOL-<100>
Description:
Audio max is 100
31 AUDOUT_MINVOL
Sets the audio min vol
for the audio output port
Command:
SEND_COMMAND <DEV>, “’AUDOUT_
MINVOL-<value>’”
Return:
‘AUDOUT_MINVOL-<value>
Description:
<value> = {0~100}
Command:
SEND_COMMAND AUDIO_OUTPUT_1,
“’AUDOUT_MINVOL-5’”
Return:
AUDOUT_MINVOL-5
Description:
Set Audio min is 5
32 ?AUDOUT_MINVOL
Gets the audio min vol
for the audio output port
Command:
SEND_COMMAND <DEV>, “’?AUDOUT_
MINVOL’”
Return:
AUDOUT_MINVOL-<value>
Description:
<value> = {0~100}
Command:
SEND_COMMAND AUDIO_OUTPUT_1,
“’?AUDOUT_MINVOL’”
Return:
AUDOUT_MINVOL-0
Description:
Audio min is 0
33 AUDOUT_VOLUME
Sets the audio vol for
the audio output port
Command:
SEND_COMMAND <DEV>, “’AUDOUT_
VOLUME-<VALUE>’”
Return:
AUDOUT_VOLUME-<VALUE>
Description:
<value> = {0~100}
Command:
SEND_COMMAND AUDOUT_VOLUME_1,
“’AUDOUT_VOLUME-50’”
Return:
AUDOUT_VOLUME-50
Description:
Set Audio vol is 50
NetLinx Commands (cont.)