Upgrading Firmware
97
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
4. When the IR file appears in the Workspace Tree, right-click on the file and select Device Mapping...
to open the Device Mapping window (FIG. 75).
5. Click the Map button to open the Enter DPS window (FIG. 76) and enter the device number, port
number, and system number for the touch panel.
6. Click OK to close the window. The IR file will now appear in the Workspace pane.
FIG. 75 Device Mapping window
FIG. 76 Enter DPS window
To Next Page
Loading...
