40
11. The remote control
for remote operation
does not work or has
stopped working.
The 12 V battery of the remote
control has lost its charge or is
disconnected.
Chan
e the battery or check the
connection. Next, press in
alternation on the right/left
direction buttons to reprogram
remote operation.
The remote control is too far away.
Move closer to the module.
12. The emergency stop
activates itself.
Greasy residues have formed on the
piston and the vibrations of the
plastic detector have activated it.
Take apart the emer
ency stop
valve and clean the piston with a
solvent. Reinstall the emergency
stop valve.
13. The en
ine starts
with the key but does
not stop and the engine
kill switch does not
work.
The en
ine kill switch is defective.
Disconnect the oran
eand black
wires. Reconnect the black wire in
place of the orange wire. Restart
the engine and stop it with the
key.
To Next Page
Loading...
Need help?
General
