5.4 WiFi Settings
The receiver unit of the bridge provides a local Wi-Fi hotspot, so you need to choose an SSID and
password for this. The host network can be mirrored to create 1 single network.
5.5 Summary Page
Review the settings and click ‘nish’
5.6 POE Passthrough
It is possible to power an IP camera via the bridge using POE pass through. Connect the camera
to the LAN port. Slide the switch to the left, as per diagram below. Power is supplied to the camera
via the bridge meaning a separate PSU is not required for the camera.
To Next Page
Loading...