ANTIFERENCE Clear Flow - Programming a Router; WAN Settings for Router Mode

6 PROGRAMMING A ROUTER
If the installation only features a modem, then a Clear Flow Wireless device can be congured as
a router.
Click ‘Router’ in the wizard menu
6.1 WAN Settings
Here we have PPPoE, static or DHCP as options.
PPPoE (Point to Point Protocol over Ethernet) is a specication for connecting multiple computer
users on an Ethernet local area network (LAN) to a remote site through common customer
premise equipment (CPE). This is the telephone company’s term for a modem or similar device.
This is the set up used by most Internet service providers. Enter the user name and password
provided by your ISP, enter the name of the service i.e. BT (VDSL) and click ‘Next’ to continue.