ANTIFERENCE Clear Flow - Factory Reset Procedure

9.6 Factory Reset
Located near the LAN/WAN ports on the device is the reset button.
A short press will re-boot the device.
A long press will reset all settings to factory default (15 seconds).
10 FAQ
10.1 How does an access point work?
An access point is a device that creates a wireless local area network, or WLAN, usually in an
ofce or large building. An access point connects to a wired router, switch, or hub via an Ethernet
cable, and projects a Wi-Fi signal to a designated area.
10.2 What’s the difference between 2.4GHz and 5.8GHz
The primary differences between the 2.4GHz and 5.8GHz wireless frequencies are range and
bandwidth.
5.8GHz provides faster data rates but with a reduced range compared to 2.4GHz but is affected
heavily by object interference (walls etc.) 2.4GHz offers coverage with much higher penetrative
ability, but may perform at slower speeds.