Anviz D100 - Log Setup

User Manual
27
Press [OK] key to enter setting interface:
Press [ IN] or [OUT] key to choose ‗Yes‘ or ‗No‘, and then press [OK] key to confirm.
Then press [C] to save the setting.
2.5.2 Log Setup
Log warning number has the highest limit of 5000. When the available records memory
is less than the ―Glog Wrn‖, system will prompt corresponding operation.
Press [ IN] or [OUT] key to select [Log Setup] option.
Press [OK] key to enter sub-menu,
Press [ IN] or [OUT] key to select [Log Alert] option. Press [OK] key to enter log alert
setting interface.
Press [ IN] or [OUT] key or number key to input log warning number. Press [OK] key
to confirm. Then press [C] to save the setting.