Luminance
1 Press MENU (Menu) to display menu.
2 Press or to select (Luminance), and press MENU to enter.
3 Press or to select submenu.
4 Press or to adjust.
5 Press AUTO to exit.
Contrast from Digital-register.
Disable dynamic contrast ratio
Enable dynamic contrast ratio
Adjust the response time.
It could be blur image, if user turns on the
OverDrive in Strong Level.
User can adjust OverDrive level base on user's
preference or turn it off.
Shadow Control Default is 50, then end-user
can adjust from 50 to 100 or 0 to increase
contrast for clear picture.
1. If picture is too dark to be saw the detail
clearly, adjusting from 50 to 100 for clear
picture.
2. If picture is too white to be saw the detail
clearly, adjusting from 50 to 0 for clear picture